The use of Bricks or Pavers to produce a walkway or patio area complements a home in a method that is unmatched. In addition, setting up a Brick or Paver sidewalk does not always require a pro.
The secret to setting up a Brick or Paver Walkway is to very first properly prepare the location where the bricks/pavers are to be set up. The location needs to be dug out at least a foot down, getting rid of all topsoil and clay soil. In addition, string lines ought to be strung on each side of the walkway. The string lines indicate the finished height of the sidewalk.
Once the area has been dug down, 3/4" gravel stone should be laid in and tamped down tightly. 2" of sand, or stone dust must be spread over the gravel. Once again the sand/stone dust must be tamped down. Stone dust is chosen. The height in between the tamped down sand and the stringline must equate to the density of the brick or paver.
Now that you have a stable base, position a 1" pipe or ledger board the length of the walkway on either side of the walkway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will develop a level surface location to lay the bricks/pavers.
Now location on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the ready location. These strips will act as your sidewalk border and aid to keep the stability and shape of the sidewalk.
The secret to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will again assist keep the stability of the sidewalk.
Undoubtedly bricks/pavers will need to be cut or split when building the pathway. Unless you want to purchase or rent an expensive wetsaw, I would recommend buying an easy brick/paver splitter. It is basically a sculpt with a large end that is the width get more info of the bricks/pavers. To in fact cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the area where you want to break the brick. Then using a hammer strike the butt end of the sculpt firmly. You might need to do this a number of times. You may also wish to flip the brick/paver over and strike the opposite of the brick using the hammer and chisle. Within a couple of strikes the brick/paver must break cleanly. If your sidewalk has curves you will require to buy/rent a wetsaw.
After setting up the bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and load down securely.
Spread stone dust over the brand-new walkway and sweep into the fractures. Repeat this procedure a number of times to guarantee the fractures are completely filled. This will finish the interlocking of the bricks and help to get rid of any weed development. Just add yard seed to the outside edges and you must have a gorgeous entrance to your house within a couple of weeks.
In addition, setting up a Brick or Paver pathway does not always need a pro. The key to installing a Brick or Paver Walkway is to first correctly prepare the area where the bricks/pavers are to be set up. Now that you have a steady base, position a 1" pipeline or ledger board the length of the sidewalk on either side of the sidewalk. These strips will act as your walkway brick crusher machine border and assistance to preserve the integrity and shape of the walkway. Inevitably bricks/pavers will need to be cut or split when developing the sidewalk.